Built-Up Roofing (BUR) Systems

BUR Roofing Systems

Family Description

We pioneered built-up roofing systems in America more than 160 years ago. Our highly reliable waterproof membrane is field-fabricated with layers of bitumen, alternating with plies of reinforcing felts.

The redundant layers give roofs exceptional resistance to water and weather. As a result, we have long-lasting, durable and worry-free systems. Few roofing companies can claim to have created nearly one billion feet of BUR that are today under full guarantee.

Products

BUR Membranes

GlasBase Plus
GlasBase Plus is intended to be used as a base sheet in built up roofing or as a base or intermediate ply in modified bitumen systems. This base sheet is flexible and uses a fiber glass reinforcement that gives it excellent stability.
GlasKap
GlasKap is used as a cap sheet in a variety of built up roofing systems.
GlasKap CR G
GlasKap CR G is intended to be used as a cap or flashing sheet in built up roofing systems. The highly reflective granules meet Title 24. Our GlasKap CR G membrane has excellent workability, relaxing quickly and laying flatter than a factory-coated sheet, allowing it to be applied quickly.
GlasKap Plus
GlasKap Plus is used as a cap sheet in a variety of built up roofing systems. It's SBS synthetic rubber and high quality asphalt blend allows the membrane to lay flat virtually eliminating wrinkles which allows for faster installation and provides better elongation and cold flexibility properties. It's fiber glass-reinforced mat gives it excellent dimensional stability and resistance to rot making it an ideal replacement for organic cap sheets.
GlasPly IV
GlasPly IV is intended for use as an interply in any built up roofing or modified bitumen roofing system. It has excellent porosity making it easy to handle and lay lines that allow the roofer to install the felt with the proper exposure and provide the correct number of plies. It's surfacing has a liquid parting agent that eliminates sticking when the felt is unrolled.
GlasPly Premier
GlasPly IV is intended for use as an interply in any built up roofing or modified bitumen roofing system.
GlasTite Flexible
GlasTite Flexible is intended to be used as a base sheet, ply sheet, or flashing membrane in built up roofing systems. It's composite reinforcement mat provides flexibility making it easy to install. The lay lines assist when installing multiple plies.
PermaPly 28
PermaPly 28 is designed for use as the first or base sheet in built up roofing or modified bitumen roof assemblies.
Ventsulation
Ventsulation® Felt may be used as a base sheet for any built up roofing or modified bitumen roofing system to be installed over a substrate that potentially contains moisture.

Vapor Barriers

JM Vapor Barrier SA
JM Vapor Barrier SA is a self-adhered membrane and can be installed on plywood, gypsum or concrete board, concrete, asphalt or metal after the substrate has been primed.
JM Vapor Barrier SAR
JM Vapor Barrier SAR is a self-adhered membrane with a fiber glass reinforcement and can be installed on plywood, gypsum or concrete board, concrete, asphalt or metal after the substrate has been primed.

BUR Accessories

CR Roofing Granules
These CR reflective roofing granules are bright white granules specifically designed for high reflectivity and durability.
Roofing Granules
Specifically engineered for optimal embedment in the bitumen. These granules are colored with durable pigments, bonded in a ceramic matrix and treated to promote excellent long-term adhesion.

Adhesives, Cements, Sealants and More

Asphalt Primer
One-part, specification grade, penetrating priming solution for multiple substrates prior to the application of a bituminous roofing system.
Bestile Utility Cement
Bestile™ Utility Cement is used to adhere both vertical and horizontal roof flashing surfaces. Useful for repairing leaks in metal, shingles, concrete, flashings, gutters, around chimneys, flues, soil pipes, drains, eaves, cornices and roof perimeters.
JM One-Step Foamable Adhesive
JM One-Step Foamable Adhesive is a polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.
JM Roofing System Urethane Adhesive - RSUA
JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive.
JM Two-Part Urethane Insulation Adhesive
JM Two-Part UIA is a Two-part cold-application adhesive used to adhere insulation board products to approved roofing substrates, and insulation to insulation.
JM Two-Part Urethane Insulation Adhesive (UIA) Canister
JM Two-Part Urethane Insulation Adhesive (UIA) Canister is a two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.
MBR Flashing Cement Base and Activator
MBR® Flashing Cement Base and Activator is a liquid-applied flashing material for bituminous systems and the PermaFlash™ Bituminous Flashing System.
MBR Utility Cement
MBR® Utility Cement is a one-part, asphalt-based, trowel-grade mastic for use in flashing details for bituminous roofing systems.

Insulation and Cover Boards

DEXcell Cement Roof Board
DEXcell Cement Roof Board is a cover board that is able to withstand prolonged exposure to moisture and meets FM Class 1 fire barrier requirements.
DEXcell FA Glass Mat Roof Board
DEXcell FA Glass Mat Roof Board is a cover board with a heavy duty coated fiber glass facer. It is moister and mold resistant and meets FM Class 1 fire barrier requirements.
DEXcell® FA VSH Glass Mat Roof Board
DEXcell® FA VSH Glass Mat Roof Board is competitively priced, easier to install and very severe hail strong to withstand the harshest conditions over the long haul.
DensDeck Prime Roof Board
DensDeck Prime Roof Board is a gypsum cover board with an enhanced coated glass mat facer
DensDeck StormX Prime Roof Board
DensDeck StormX Prime Roof Board contains an enhanced coated glass mat facer and achieves FM's VSH approval in select JM TPO systems.
DuraBoard
DuraBoard uses expanded perlite and reinforcing cellulosic fibers to provide excellent insulation with a stable R-value, fire resistance, and a high recycled content. It is used in multi-ply systems and can be installed in a number of ways.
ENRGY 3 - Flat and Tapered
ENRGY 3® is a closed-cell polyisocyanurate foam core insulation board offering a high R-value to keep your building well insulated from the elements.
ENRGY 3 CGF - Flat and Tapered
ENRGY 3® CGF is a closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.
FESCO Board
JM FESCO Board is a protective perlite-based cover board or low-thermal insulation board proven to reduce blistering in hot-asphalt applications.
FESCO Board HD
JM FESCO Board HD is a high-density, protective, perlite-based cover board or low-thermal insulation board proven to reduce blistering in hot-asphalt applications.
FesCant Plus and Tapered FESCO Edge Strip
FesCant Plus and Tapered FESCO Edge Strip are high-density, laminated cant board made of high strength fibers and expanded perlite.
Half-Inch Retro-Fit Board
1/2" Retro-Fit™ Board is a low-thermal, perlite-based cover board with recycled materials providing strength to the board.
ProtectoR Foam
Dual-Density Polyisocyanurate Composite Board produced with our High-Density ProtectoR® HD cover board and our standard-density Foam (ENRGY® 3 CGF).
RetroPlus Roof Board
RetroPlus™ Roof Board is a high-density, expanded, perlite-based cover board engineered to optimize system performance across all applications.
SECUROCK Cement Roof Board
SECUROCK Cement Roof Board is ideal for liquid applied membrane roof systems. It has superior wind-uplift performance for a wide variety of roof assemblies and excellent fire performance.
SECUROCK Gypsum-Fiber Roof Board
SECUROCK Gypsum-Fiber Roof Board contains a integral water-resistant core and has excellent fire performance.
Tapered FESCO Board
Tapered, protective, perlite-based cover board or low thermal insulation board proven to reduce blistering in hot-asphalt applications.

Fasteners and Plates

All Purpose Fasteners
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
JM ENRGY Anchor
ENRGY® Anchor is a lightweight, roof-top integrated, photovoltaic (PV)-mounting solution consisting of a Galvalume®*-coated steel plate welded to a stainless steel stud, with a JM membrane flashing target. Each assembly includes a leveling washer and membrane separator.
JM Termination Systems
JM Termination Systems include termination bars, anchor discs and masonry nail-in anchor and are used for membrane fastening systems.
Lightweight Concrete (LWC) Fasteners
Lightweight Concrete (LWC) Base Sheet Fasteners are expanding base sheet fasteners with Galvalume®-coated steel plates used in multi-ply systems.
Lite-Deck Fasteners and Plates
Lite-Deck Fasteners are available in lengths from 25 /8” to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.
Polymer Auger Fasteners
Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.
Structural Concrete Deck Fasteners and Plates
The Structural Concrete Deck Fastener is a diamond point, non-threaded carbon steel insulation and membrane fastener.
UltraFast AccuTrac Fastener and Plate System
The UltraFast® AccuTrac™ Fastener and Plate System utilizes the standard UltraFast® Fastener and the UltraFast® Accutrac™, recessed or flat bottomed, square plate. The AccuTrac™ tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.
UltraFast Fasteners and Plates
UltraFast® Fasteners and Plates are used to fasten insulation in both multi-ply and single ply systems. The UltraFast® Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. The UltraFast® Plates are either round, high strength polypropylene plates with a special locking feature or round or square, premium Galvalume®*-coated steel metal plates.
UltraLok Locking Impact Fastener and Plate
UltraLok™ Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®*-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.

Liquid Applied

1-Part PermaFlash
1-Part PermaFlash is a unique, one-component, elastomeric, liquid applied flashing material, consisting of an asphalt/polyurethane resin. It is formulated for use with Johns Manville (JM) PermaFlash Scrim and bituminous membrane products.
JM PMMA All Purpose Primer
JM PMMA Primer All-Purpose promotes adhesion and reduces staining on applications that contain residual or existing asphalt systems.
JM PMMA Catalyst
For use with JM BUR and SBS membrane products. JM PMMA Catalyst is a reactive agent used to initiate curing of JM PMMA liquid resins and primer.
JM PMMA Cleaner
JM PMMA Cleaner is used to clean and reactivate the transition area between existing, cured in-place JM PMMA membranes and primers and new tie-ins, repairs and staged coats of resin. This product may also be used as solvent for cleaning metal and plastic surfaces prior to resin application as well as tools and equipment used with the application of the JM PMMA system.
JM PMMA Detailer
Combined with JM PMMA Catalyst to form a rapid-curing, flexible polymethyl-methacrylate (PMMA) resin containing chopped fiber reinforcement.
JM PMMA Field Resin
JM PMMA Field Resin is part of a two-component, fast-curing, polymethyl-methacrylate (PMMA) system for roofing and waterproofing application. It is combined with JM PMMA Catalyst and JM PMMA Scrim to form a monolithic reinforced membrane.
JM PMMA Flashing Resin
Use JM PMMA Flashing Resin with JM PMMA Catalyst and JM PMMA Scrim to form a monolithic, self-reinforced flashing membrane for penetrations and a variety of other details.
JM PMMA Metal Primer Base and Activator
The JM PMMA Metal Primer Base and Activator products serve as a primer for a JM PMMA system.
JM PMMA Repair Paste
For use with JM PMMA Catalyst to form a rapid-curing, flexible resin.
JM PMMA Scrim
JM PMMA Scrim is used in JM PMMA liquid-applied, reinforced membrane systems to improve tear strength, puncture resistance, and crack bridging apabilities. It is a non-woven, chopped strand fabric reinforcement.
JM PMMA THIXO
JM PMMA THIXO is used with JM PMMA resin systems as a thixotropic additive. It may be mixed with JM PMMA Resin or JM PMMA Top Coats.
JM PMMA Textured Top Coat
Use JM PMMA Textured Top Coat with JM PMMA Color Pack and JM PMMA Catalyst to form a flexible resin with pre-mixed aggregate.
JM PMMA Top Coat
For use with JM PMMA membrane systems in high traffic areas such as balconies or walkways. JM PMMA Textured Top Coat is combined with JM PMMA Color Pack and JM PMMA Catalyst to form a flexible resin with pre-mixed aggregate.
JM PMMA Top Coat Color Pack
JM PMMA Top Coat can be tinted in a variety colors. Check out the full list to make your commercial roof even more unique.
PermaFlash System
The PermaFlash System consists of PermaFlash Primer, MBR Flashing Cement, and PermaFlash Scrim. It is an integrated flashing system specifically formulated for use in bituminous systems.

Coatings

Asphalt Emulsion Roof Coating
Asphalt Emulsion Roof Coating is a one-part, asphalt-based, clay emulsion roof coating for bituminous roofing systems.
Fibrated Aluminum Roof Coating

Fibrated Aluminum Roof Coating is a protective, reflective coating for built-up, SBS and APP modified bitumen, metal, corrugated and tin roofs.
JM Coating Acrylic
JM Coating Acrylic is designed for use as a reflective top coat either over built-up, modified bitumen, or mechanically attached or adhered aged TPO or PVC membranes.
JM Coating Acrylic CR
JM Coating Acrylic CR is designed for use as a reflective top coat either over built-up, modified bitumen, or mechanically attached or adhered aged TPO or PVC membranes.
JM Coating Acrylic Flashing
Designed for use over a variety of substrates, JM Coating Acrylic Flashing is a reinforced flashing mastic used for repair applications, or to seal common flashing conditions when using JM Coating Acrylic and JM Coating Acrylic CR.
JM Coating Field Polyester Reinforcing Fabric
JM Coating Field Polyester Reinforcing Fabric is a firm stitch-bond polyester used in JM Coatings systems.
JM Coating Polyester Reinforcing Fabric
JM Coating Field Polyester Reinforcing Fabric is a non-woven, fabric reinforcement.
JM Coating Repair Tape
JM Coating Repair Tape is used to seal seams, flashings and repair areas of existing roof prior to application of JM Coating Membrane systems.
JM Coating Silicone
JM Coating Silicone is designed for use over a variety of substrates, including built-up, modified bitumen, and aged mechanically attached or adhered TPO and EPDM membranes.
JM Coating Silicone Flashing
Designed for use over a variety of substrates, JM Coating Silicone Flashing is a mastic used for repair applications with a reinforcing fabric, or to seal common flashing conditions when using JM Coating Silicone.
JM Coating Universal Base
JM Coating Universal Base is used as a base coat to create a smooth, fully-adhered substrate and helps to prevent bleed through over asphalt substrates.
TopGard 4000
One-part, acrylic reflective coating (in white or tan) for bituminous and single ply roof systems.
TopGard 5000
One-part, acrylic reflective coating for bituminous or single ply roof systems.
TopGard Base Coat

One-part, acrylic base coating (for TopGard® 4000 or 5000) that acts as an oil-bleed barrier for bituminous systems.

Specialty Roofing Products

Expansion Joint Cover - Style CF - Curb to Curb
Elastomeric bellows supported by a closed-cell foam backer for installation on wood curbs.
Expansion Joint Cover - Style CF/EJ - Curb to Wall
Elastomeric membrane bellows supported by a closed cell foam backer.
Expansion Joint Cover - Style EJ - Cant to Cant
Elastomeric membrane bellows for installation on roof-to-roof conditions.
Expansion Joint Cover - Style EJ - Cant to Wall
Elastomeric membrane bellows for installation on roof-to-wall installations.
Expansion Joint Cover - Style EJ/WC - Curb to Curb
Elastomeric or PVC membrane supported by a closed-cell foam backer.
Expansion Joint Cover - Style EJ/WC - Curb to Wall
Elastomeric or PVC membrane for installation on any width curb.
Hercules RetroDrain
One-piece spun aluminum body, heavy-duty cast aluminum dome/clamping ring and depressed sump area and is designed for use in all roofing systems.
OverFlow and FlowControl
Spun aluminum round drain attachment for use with all RetroDrains.
Presto Lock Coping System
A cost-effective snap-on coping system designed for use with single ply, built-up and modified bitumen roofing systems. The system consists of galvanized steel anchor clips and aluminum or galvanized coping covers in a variety of thicknesses and colors.
Presto-Tite Fascia System (Bituminous Systems)
A high performance edge treatment for all modified bitumen and BUR roof projects. Nonpenetrating design allows for vertical face attachment without penetrating the horizontal flange, and eliminates the need to strip-in the deck flange, eliminating potential delamination between the asphalt and metal deck flange due to thermal expansion and contraction forces. Provides maximum protection against wind uplift damage.
Presto-Weld Drip Edge
Presto-Weld drip edge is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC or TPO membrane. This edge comes with a factory applied, 8" wide PVC flashing strip or 6" wide TPO flashing strip of Johns Manville membrane to help save labor installation costs in the field. Presto-Weld is an economical solution for many conditions such as continuous edge drainage with or without a gutter condition.
U-Flow Screwdriver
The U-Flow Screwdriver is an extra long screwdriver to tighten the special recessed head screws on U-Flow compression seals.

BUR Membranes

GlasBase Plus
GlasBase Plus is intended to be used as a base sheet in built up roofing or as a base or intermediate ply in modified bitumen systems. This base sheet is flexible and uses a fiber glass reinforcement that gives it excellent stability.
GlasKap
GlasKap is used as a cap sheet in a variety of built up roofing systems.
GlasKap CR G
GlasKap CR G is intended to be used as a cap or flashing sheet in built up roofing systems. The highly reflective granules meet Title 24. Our GlasKap CR G membrane has excellent workability, relaxing quickly and laying flatter than a factory-coated sheet, allowing it to be applied quickly.
GlasKap Plus
GlasKap Plus is used as a cap sheet in a variety of built up roofing systems. It's SBS synthetic rubber and high quality asphalt blend allows the membrane to lay flat virtually eliminating wrinkles which allows for faster installation and provides better elongation and cold flexibility properties. It's fiber glass-reinforced mat gives it excellent dimensional stability and resistance to rot making it an ideal replacement for organic cap sheets.
GlasPly IV
GlasPly IV is intended for use as an interply in any built up roofing or modified bitumen roofing system. It has excellent porosity making it easy to handle and lay lines that allow the roofer to install the felt with the proper exposure and provide the correct number of plies. It's surfacing has a liquid parting agent that eliminates sticking when the felt is unrolled.
GlasPly Premier
GlasPly IV is intended for use as an interply in any built up roofing or modified bitumen roofing system.
GlasTite Flexible
GlasTite Flexible is intended to be used as a base sheet, ply sheet, or flashing membrane in built up roofing systems. It's composite reinforcement mat provides flexibility making it easy to install. The lay lines assist when installing multiple plies.
PermaPly 28
PermaPly 28 is designed for use as the first or base sheet in built up roofing or modified bitumen roof assemblies.
Ventsulation
Ventsulation® Felt may be used as a base sheet for any built up roofing or modified bitumen roofing system to be installed over a substrate that potentially contains moisture.

Vapor Barriers

JM Vapor Barrier SA
JM Vapor Barrier SA is a self-adhered membrane and can be installed on plywood, gypsum or concrete board, concrete, asphalt or metal after the substrate has been primed.
JM Vapor Barrier SAR
JM Vapor Barrier SAR is a self-adhered membrane with a fiber glass reinforcement and can be installed on plywood, gypsum or concrete board, concrete, asphalt or metal after the substrate has been primed.

BUR Accessories

CR Roofing Granules
These CR reflective roofing granules are bright white granules specifically designed for high reflectivity and durability.
Roofing Granules
Specifically engineered for optimal embedment in the bitumen. These granules are colored with durable pigments, bonded in a ceramic matrix and treated to promote excellent long-term adhesion.

Adhesives, Cements, Sealants and More

Asphalt Primer
One-part, specification grade, penetrating priming solution for multiple substrates prior to the application of a bituminous roofing system.
Bestile Utility Cement
Bestile™ Utility Cement is used to adhere both vertical and horizontal roof flashing surfaces. Useful for repairing leaks in metal, shingles, concrete, flashings, gutters, around chimneys, flues, soil pipes, drains, eaves, cornices and roof perimeters.
JM One-Step Foamable Adhesive
JM One-Step Foamable Adhesive is a polyurethane adhesive for attaching insulation/cover boards to the roof deck or other insulation boards.
JM Roofing System Urethane Adhesive - RSUA
JM Roofing System Urethane Adhesive is a two-component polyurethane adhesive.
JM Two-Part Urethane Insulation Adhesive
JM Two-Part UIA is a Two-part cold-application adhesive used to adhere insulation board products to approved roofing substrates, and insulation to insulation.
JM Two-Part Urethane Insulation Adhesive (UIA) Canister
JM Two-Part Urethane Insulation Adhesive (UIA) Canister is a two-component polyurethane adhesive used for attaching fleece-backed membranes to insulation and insulation boards to the roof deck or to other insulation boards.
MBR Flashing Cement Base and Activator
MBR® Flashing Cement Base and Activator is a liquid-applied flashing material for bituminous systems and the PermaFlash™ Bituminous Flashing System.
MBR Utility Cement
MBR® Utility Cement is a one-part, asphalt-based, trowel-grade mastic for use in flashing details for bituminous roofing systems.

Insulation and Cover Boards

DEXcell Cement Roof Board
DEXcell Cement Roof Board is a cover board that is able to withstand prolonged exposure to moisture and meets FM Class 1 fire barrier requirements.
DEXcell FA Glass Mat Roof Board
DEXcell FA Glass Mat Roof Board is a cover board with a heavy duty coated fiber glass facer. It is moister and mold resistant and meets FM Class 1 fire barrier requirements.
DEXcell® FA VSH Glass Mat Roof Board
DEXcell® FA VSH Glass Mat Roof Board is competitively priced, easier to install and very severe hail strong to withstand the harshest conditions over the long haul.
DensDeck Prime Roof Board
DensDeck Prime Roof Board is a gypsum cover board with an enhanced coated glass mat facer
DensDeck StormX Prime Roof Board
DensDeck StormX Prime Roof Board contains an enhanced coated glass mat facer and achieves FM's VSH approval in select JM TPO systems.
DuraBoard
DuraBoard uses expanded perlite and reinforcing cellulosic fibers to provide excellent insulation with a stable R-value, fire resistance, and a high recycled content. It is used in multi-ply systems and can be installed in a number of ways.
ENRGY 3 - Flat and Tapered
ENRGY 3® is a closed-cell polyisocyanurate foam core insulation board offering a high R-value to keep your building well insulated from the elements.
ENRGY 3 CGF - Flat and Tapered
ENRGY 3® CGF is a closed-cell polyisocyanurate foam core with an inorganic-coated glass facer on each side. It offers high R-value per inch and achieves a UL Class A approval in select systems.
FESCO Board
JM FESCO Board is a protective perlite-based cover board or low-thermal insulation board proven to reduce blistering in hot-asphalt applications.
FESCO Board HD
JM FESCO Board HD is a high-density, protective, perlite-based cover board or low-thermal insulation board proven to reduce blistering in hot-asphalt applications.
FesCant Plus and Tapered FESCO Edge Strip
FesCant Plus and Tapered FESCO Edge Strip are high-density, laminated cant board made of high strength fibers and expanded perlite.
Half-Inch Retro-Fit Board
1/2" Retro-Fit™ Board is a low-thermal, perlite-based cover board with recycled materials providing strength to the board.
ProtectoR Foam
Dual-Density Polyisocyanurate Composite Board produced with our High-Density ProtectoR® HD cover board and our standard-density Foam (ENRGY® 3 CGF).
RetroPlus Roof Board
RetroPlus™ Roof Board is a high-density, expanded, perlite-based cover board engineered to optimize system performance across all applications.
SECUROCK Cement Roof Board
SECUROCK Cement Roof Board is ideal for liquid applied membrane roof systems. It has superior wind-uplift performance for a wide variety of roof assemblies and excellent fire performance.
SECUROCK Gypsum-Fiber Roof Board
SECUROCK Gypsum-Fiber Roof Board contains a integral water-resistant core and has excellent fire performance.
Tapered FESCO Board
Tapered, protective, perlite-based cover board or low thermal insulation board proven to reduce blistering in hot-asphalt applications.

Fasteners and Plates

All Purpose Fasteners
All Purpose Fasteners are #14 case-hardened steel fasteners with a #3 Phillips head. The point is designed for quick installation in new or re-roof applications.
JM ENRGY Anchor
ENRGY® Anchor is a lightweight, roof-top integrated, photovoltaic (PV)-mounting solution consisting of a Galvalume®*-coated steel plate welded to a stainless steel stud, with a JM membrane flashing target. Each assembly includes a leveling washer and membrane separator.
JM Termination Systems
JM Termination Systems include termination bars, anchor discs and masonry nail-in anchor and are used for membrane fastening systems.
Lightweight Concrete (LWC) Fasteners
Lightweight Concrete (LWC) Base Sheet Fasteners are expanding base sheet fasteners with Galvalume®-coated steel plates used in multi-ply systems.
Lite-Deck Fasteners and Plates
Lite-Deck Fasteners are available in lengths from 25 /8” to 12" (67 mm to 305 mm), come with a square drive and offer coarse thread to provide high pullout resistance.
Polymer Auger Fasteners
Polymer Auger Fasteners are glass-reinforced nylon fasteners with an internal ¼" (6 mm) square drive. Polymer Auger Fasteners have a 1" (2.5 cm) diameter head.
Structural Concrete Deck Fasteners and Plates
The Structural Concrete Deck Fastener is a diamond point, non-threaded carbon steel insulation and membrane fastener.
UltraFast AccuTrac Fastener and Plate System
The UltraFast® AccuTrac™ Fastener and Plate System utilizes the standard UltraFast® Fastener and the UltraFast® Accutrac™, recessed or flat bottomed, square plate. The AccuTrac™ tool positions the plate and installs fasteners 15⁄8" - 6" (4.13 cm - 15.24 cm) in a one-step process. Consistent vertical alignment of fasteners ensures maximum thread engagement and pullout performance.
UltraFast Fasteners and Plates
UltraFast® Fasteners and Plates are used to fasten insulation in both multi-ply and single ply systems. The UltraFast® Fastener is a #12, case-hardened steel, polymer-coated fastener with a buttress thread design that provides maximum pullout values and minimizes fastener backout. The UltraFast® Plates are either round, high strength polypropylene plates with a special locking feature or round or square, premium Galvalume®*-coated steel metal plates.
UltraLok Locking Impact Fastener and Plate
UltraLok™ Locking Impact Fasteners and Plates consist of a preassembled Galvanized steel tube, a 2.7" (6.86 cm) Galvalume®*-coated steel disc, and a precision-formed, coated- steel, high tensile, wirelocking staple. The disc is securely clamped to the tube and is rib-reinforced to resist cupping.

Liquid Applied

1-Part PermaFlash
1-Part PermaFlash is a unique, one-component, elastomeric, liquid applied flashing material, consisting of an asphalt/polyurethane resin. It is formulated for use with Johns Manville (JM) PermaFlash Scrim and bituminous membrane products.
JM PMMA All Purpose Primer
JM PMMA Primer All-Purpose promotes adhesion and reduces staining on applications that contain residual or existing asphalt systems.
JM PMMA Catalyst
For use with JM BUR and SBS membrane products. JM PMMA Catalyst is a reactive agent used to initiate curing of JM PMMA liquid resins and primer.
JM PMMA Cleaner
JM PMMA Cleaner is used to clean and reactivate the transition area between existing, cured in-place JM PMMA membranes and primers and new tie-ins, repairs and staged coats of resin. This product may also be used as solvent for cleaning metal and plastic surfaces prior to resin application as well as tools and equipment used with the application of the JM PMMA system.
JM PMMA Detailer
Combined with JM PMMA Catalyst to form a rapid-curing, flexible polymethyl-methacrylate (PMMA) resin containing chopped fiber reinforcement.
JM PMMA Field Resin
JM PMMA Field Resin is part of a two-component, fast-curing, polymethyl-methacrylate (PMMA) system for roofing and waterproofing application. It is combined with JM PMMA Catalyst and JM PMMA Scrim to form a monolithic reinforced membrane.
JM PMMA Flashing Resin
Use JM PMMA Flashing Resin with JM PMMA Catalyst and JM PMMA Scrim to form a monolithic, self-reinforced flashing membrane for penetrations and a variety of other details.
JM PMMA Metal Primer Base and Activator
The JM PMMA Metal Primer Base and Activator products serve as a primer for a JM PMMA system.
JM PMMA Repair Paste
For use with JM PMMA Catalyst to form a rapid-curing, flexible resin.
JM PMMA Scrim
JM PMMA Scrim is used in JM PMMA liquid-applied, reinforced membrane systems to improve tear strength, puncture resistance, and crack bridging apabilities. It is a non-woven, chopped strand fabric reinforcement.
JM PMMA THIXO
JM PMMA THIXO is used with JM PMMA resin systems as a thixotropic additive. It may be mixed with JM PMMA Resin or JM PMMA Top Coats.
JM PMMA Textured Top Coat
Use JM PMMA Textured Top Coat with JM PMMA Color Pack and JM PMMA Catalyst to form a flexible resin with pre-mixed aggregate.
JM PMMA Top Coat
For use with JM PMMA membrane systems in high traffic areas such as balconies or walkways. JM PMMA Textured Top Coat is combined with JM PMMA Color Pack and JM PMMA Catalyst to form a flexible resin with pre-mixed aggregate.
JM PMMA Top Coat Color Pack
JM PMMA Top Coat can be tinted in a variety colors. Check out the full list to make your commercial roof even more unique.
PermaFlash System
The PermaFlash System consists of PermaFlash Primer, MBR Flashing Cement, and PermaFlash Scrim. It is an integrated flashing system specifically formulated for use in bituminous systems.

Coatings

Asphalt Emulsion Roof Coating
Asphalt Emulsion Roof Coating is a one-part, asphalt-based, clay emulsion roof coating for bituminous roofing systems.
Fibrated Aluminum Roof Coating

Fibrated Aluminum Roof Coating is a protective, reflective coating for built-up, SBS and APP modified bitumen, metal, corrugated and tin roofs.
JM Coating Acrylic
JM Coating Acrylic is designed for use as a reflective top coat either over built-up, modified bitumen, or mechanically attached or adhered aged TPO or PVC membranes.
JM Coating Acrylic CR
JM Coating Acrylic CR is designed for use as a reflective top coat either over built-up, modified bitumen, or mechanically attached or adhered aged TPO or PVC membranes.
JM Coating Acrylic Flashing
Designed for use over a variety of substrates, JM Coating Acrylic Flashing is a reinforced flashing mastic used for repair applications, or to seal common flashing conditions when using JM Coating Acrylic and JM Coating Acrylic CR.
JM Coating Field Polyester Reinforcing Fabric
JM Coating Field Polyester Reinforcing Fabric is a firm stitch-bond polyester used in JM Coatings systems.
JM Coating Polyester Reinforcing Fabric
JM Coating Field Polyester Reinforcing Fabric is a non-woven, fabric reinforcement.
JM Coating Repair Tape
JM Coating Repair Tape is used to seal seams, flashings and repair areas of existing roof prior to application of JM Coating Membrane systems.
JM Coating Silicone
JM Coating Silicone is designed for use over a variety of substrates, including built-up, modified bitumen, and aged mechanically attached or adhered TPO and EPDM membranes.
JM Coating Silicone Flashing
Designed for use over a variety of substrates, JM Coating Silicone Flashing is a mastic used for repair applications with a reinforcing fabric, or to seal common flashing conditions when using JM Coating Silicone.
JM Coating Universal Base
JM Coating Universal Base is used as a base coat to create a smooth, fully-adhered substrate and helps to prevent bleed through over asphalt substrates.
TopGard 4000
One-part, acrylic reflective coating (in white or tan) for bituminous and single ply roof systems.
TopGard 5000
One-part, acrylic reflective coating for bituminous or single ply roof systems.
TopGard Base Coat

One-part, acrylic base coating (for TopGard® 4000 or 5000) that acts as an oil-bleed barrier for bituminous systems.

Specialty Roofing Products

Expansion Joint Cover - Style CF - Curb to Curb
Elastomeric bellows supported by a closed-cell foam backer for installation on wood curbs.
Expansion Joint Cover - Style CF/EJ - Curb to Wall
Elastomeric membrane bellows supported by a closed cell foam backer.
Expansion Joint Cover - Style EJ - Cant to Cant
Elastomeric membrane bellows for installation on roof-to-roof conditions.
Expansion Joint Cover - Style EJ - Cant to Wall
Elastomeric membrane bellows for installation on roof-to-wall installations.
Expansion Joint Cover - Style EJ/WC - Curb to Curb
Elastomeric or PVC membrane supported by a closed-cell foam backer.
Expansion Joint Cover - Style EJ/WC - Curb to Wall
Elastomeric or PVC membrane for installation on any width curb.
Hercules RetroDrain
One-piece spun aluminum body, heavy-duty cast aluminum dome/clamping ring and depressed sump area and is designed for use in all roofing systems.
OverFlow and FlowControl
Spun aluminum round drain attachment for use with all RetroDrains.
Presto Lock Coping System
A cost-effective snap-on coping system designed for use with single ply, built-up and modified bitumen roofing systems. The system consists of galvanized steel anchor clips and aluminum or galvanized coping covers in a variety of thicknesses and colors.
Presto-Tite Fascia System (Bituminous Systems)
A high performance edge treatment for all modified bitumen and BUR roof projects. Nonpenetrating design allows for vertical face attachment without penetrating the horizontal flange, and eliminates the need to strip-in the deck flange, eliminating potential delamination between the asphalt and metal deck flange due to thermal expansion and contraction forces. Provides maximum protection against wind uplift damage.
Presto-Weld Drip Edge
Presto-Weld drip edge is a factory-fabricated coated metal edge system used to terminate at the perimeter of a PVC or TPO membrane. This edge comes with a factory applied, 8" wide PVC flashing strip or 6" wide TPO flashing strip of Johns Manville membrane to help save labor installation costs in the field. Presto-Weld is an economical solution for many conditions such as continuous edge drainage with or without a gutter condition.
U-Flow Screwdriver
The U-Flow Screwdriver is an extra long screwdriver to tighten the special recessed head screws on U-Flow compression seals.

Use our locator to find your nearest contractor or distributor.

Find Your Local Roofing Contractor or Distributor Here

BUR Installation and Details

When it comes to design, we've got the tools to get you from the desk to the roof. Here you will find all of the BUR specifications, 3-part specs, details and installation guides. If you have any questions when it comes to installation, please contact our Specifier Services Group for design and your local technical representative for the field.

Flashing Details
Fastening Patterns
Assembly Plates
Specifications
Installation Guides


EDGE	CAD	PDF
BIT-4 (GTR) Roof Edge Gutter	DWG	PDF
BIT-4 Roof Edge with Presto Tite	DWG	PDF


EXPANSION, TIE-IN AND TRANSITION*	CAD	PDF
BIT-1 (NLB) Base Flashing for Non Load Brng Wall-Curb to Wall EJ	DWG	PDF
BIT- 5 Base Flashing for Non Load Bearing Wall & Metal EJ	DWG	PDF
BIT- 7 Curb Mounted Roof to Roof EJ Cover	DWG	PDF

*ALSO REFER TO SPECIALTY ROOFING PRODUCTS TRANSITION & INTERSECTION DETAILS


CURBS AND CORNERS	CAD	PDF
BIT-8 Prefabricated Curb	DWG	PDF
BIT-26 Base Flashing at Outside Corner	DWG	PDF
BIT-27 Base Flashing at Inside corner	DWG	PDF


DRAINS, PIPES, AND VENTS	CAD	PDF
BIT-9 Plumbing Vent	DWG	PDF
BIT-10 One Way Roof Vent - FP-10	DWG	PDF
BIT-11 Metal Drain	DWG	PDF
BIT-21 Primary Metal Scupper in Sump	DWG	PDF
BIT-22 Overflow Metal Scupper	DWG	PDF
BIT-23 Vent Stack (Warm)	DWG	PDF


PENETRATION, EQUIPMENT SUPPORT AND PROTECTION	CAD	PDF
BIT-16 Roof Penetration Pan	DWG	PDF
BIT-17 Lighting Rod on Roof Surface	DWG	PDF
BIT-PT-01 Bituminous Light Support	DWG	PDF
BIT-PT-02 Bituminous Medium Support	DWG	PDF
BIT-PT-03 Bituminous Heavy Support	DWG	PDF
BIT-PT-04 DynaTred Traffic Pads with Pavers	DWG	PDF
BIT-PT-05 DynaTred Traffic Pads	DWG	PDF


*WALL FLASHING*	*CAD*	*PDF*
BIT- 1 (LB) Base Flashing for Load Brng Wall with Counterflashing	DWG	PDF
BIT-2 (WL) Base Flashing for Wall less than 24 inches	DWG	PDF
BIT-3 (WH) Base Flashing for Wall more than 24 inched with Coping	DWG	PDF
BIT-3 (WL) Base Flashing for Wall less than 24 inches with Coping	DWG	PDF
BIT-6 (TH) Base Flashing for Wall more than 24 inches with Coping	DWG	PDF
BIT-6 (TL) Base Flashing for Wall less than 24 inches with Coping	DWG	PDF
BIT-15 (E) EPDM Wall Covering with BUR Base Flashing	DWG	PDF
BIT-15 (E) Alt-EPDM Wall Covering with BUR Base Flashing	DWG	PDF
BIT-15 (P) PVC Wall Covering with BUR Base Flashing	DWG	PDF
BIT-15 (T) TPO Wall Covering with BUR Base Flashing	DWG	PDF


EDGE	CAD	PDF
DFE-4 (PRESTO LOCK) Facia, Presto Lock™ Fascia System	DWG	PDF
DFE-4 (GS) Gravel Stop	DWG	PDF
DFE-4 (GS-ALT) Gravel Stop (Alternate)	DWG	PDF
DFE-4 (GTR) Gutter	DWG	PDF
DFE-4 (PRESTO TITE) Presto-Tite	DWG	PDF
DFE-4 (RFS) Rail Fascia System Roof Edge	DWG	PDF
DFE-4 (RMCF) Raised Metal Cant Fasia	DWG	PDF

*EXPANSION, TIE-IN AND TRANSITION*	*CAD*	*PDF*
DFE-1 (NLB) Curb to Wall Expansion Joint	DWG	PDF
DFE-5 (NLB-ALT) Metal Expansion Joint (Alternate)	DWG	PDF
DFE-7 Roof-to-Roof, Curb Mounted, Expand-O-Flash®	DWG	PDF


CURBS AND CORNERS	CAD	PDF
DFE-27 Inside Corner	DWG	PDF
DFE-26 Outside Corner	DWG	PDF
DFE-8 Prefabricated	DWG	PDF
DFE-8 (Skylight) Prefabricated Curb	DWG	PDF
DFE-19 Roof Hatch Curb	DWG	PDF


*PENETRATION, EQUIPMENT SUPPORT AND PROTECTION*	*CAD*	*PDF*
DFE-16 Penetration Pocket	DWG	PDF
DFE-17 Lightning Rod, Surface Mount	DWG	PDF
DFE-18 JM ENRGY Anchor - SBS Adhered	DWG	PDF


WALL FLASHING	CAD	PDF
DFE-1 (LB) Masonry Wall with Counter Flashing	DWG	PDF
DFE-2 (LB) TWO PLY BASE FLASHING FOR LB MASONRY WALL COUNTER FLASHING	DWG	PDF
DFE-2 (PT) PERMA TITE COPING	DWG	PDF
DFE-2 BASE FLASHING WITH SURFACE MOUNTED COUNTER FLASHING	DWG	PDF
DFE-3 (WH) Wood Wall > 24" with Coping	DWG	PDF
DFE-3 (WL) Wood Wall < 24" with Coping	DWG	PDF
DFE-6 (TH) Masonry Wall > 24" with Coping	DWG	PDF
DFE-6 (TL) Masonry Wall < 24" with Coping	DWG	PDF
DFE-15 (E) EPDM Wall Covering with Bituminous Base Flashing	DWG	PDF
DFE-15 (P) PVC Wall Covering with BIT Base Flashing	DWG	PDF
DFE-15 (T) TPO Wall Covering with Bituminous Base Flashing	DWG	PDF
DFE-15 (T-ALT) TPO Wall Covering with Bituminous Base Flashing (Alternate)	DWG	PDF
DFE-20 (WL) Gypsum Wall on Metal Studs < 24" w/Coping	DWG	PDF
DFE-20 (WH) Gypsum Wall on Metal Studs > 24" w/Coping	DWG	PDF
DFE-24 Base Flashing for Venting Lightweight Concrete	DWG	PDF

VAPOR BARRIER SA DETAILS	CAD	PDF	*BIM*
VB-1 JM Vapor Barrier SA - Wall Base Detail	DWG	PDF	-
VB-1 (ALT) JM Vapor Barrier SA - Wall Base Detail - Alt	DWG	PDF	-
VB-2 JM Vapor Barrier SA - Pipe Penetration Detail	DWG	PDF	-
VB-3 JM Vapor Barrier SA - Drain Detail	DWG	PDF	-
VB-4 JM Vapor Barrier SA - Detail at Field Laps	DWG	PDF	-
VB-5 JM Vapor Barrier SA - Outside Curb Detail	DWG	PDF	-
VB-6 JM Vapor Barrier SA - Inside Curb Detail	DWG	PDF	-

*VAPOR BARRIER SAR DETAILS*	CAD	PDF	*BIM*
VB-1 JM Vapor Barrier SAR - Wall Base	DWG	PDF	-
VB-1 (ALT) JM Vapor Barrier SAR - Wall Base	DWG	PDF	-
VB-2 JM Vapor Barrier SAR - Pipe Penetration	DWG	PDF	-
VB-3 JM Vapor Barrier SAR - Drain	DWG	PDF	-
VB-4 JM Vapor Barrier SAR - Field Laps	DWG	PDF	-
VB-5 JM Vapor Barrier SAR - Outside Curb	DWG	PDF	-
VB-6 JM Vapor Barrier SAR - Inside Curb	DWG	PDF	-

2x4 Ft. Roof Insulation Fastener Placement

4x4 Ft. Roof Insulation Fastener Placement

4x8 Ft. Roof Insulation Fastener Placement

BM-12 Mechanically Fastened Base Sheet (12" o.c.)

BM-12,12,12 Mechanically Fastened Base Sheet (12", 12", 12" o.c.)

BM-18 Mechanically Fastened Base Sheet (18" o.c.)

BM-6 Mechanically Fastened Base Sheet (6" o.c.)

BM-7,7,7 Mechanically Fastened Base Sheet (7", 7", 7" o.c.)

BM-7,9,9 Mechanically Fastened Base Sheet (7", 9", 9" o.c.)

BM-75,75,75 Mechanically Fastened Base Sheet (7.5", 7.5", 7.5" o.c.)

BM-9,12,12 Mechanically Fastened Base Sheet (9", 12", 12" o.c.)

BM-9,18,18 Mechanically Fastened Base Sheet (9", 18", 18" o.c.)

BM-9,9,9 Mechanically Fastened Base Sheet (9", 9", 9" o.c.)

FA-16 Fully Adhered Cover (16-24-32)

FA-8 Fully Adhered Cover (8-16-32)

CBUA-12-6-4 Cover Board Urethane Adhesive Fastening

ICBUA-8-4-4 Insulation and Cover Board Urethane Adhesive Fastening

ICBUA-12-6-4 Insulation and Cover Board Urethane Adhesive Fastening

INUA-12-6-4 Insulation Urethane Adhesive Fastening

BM-9,9,9-TS Tape and Staple Attached Base Sheet (9", 9", 9" o.c.)

BM-9,9,9,9-TS Tape and Staple Attached Base Sheet (9", 9", 9", 9" o.c.)

Assembly Plate Use Instructions

*Please be sure to download the file before selecting your assembly.*

Built-Up Assembly Plates

3 Ply BUR Bonded to Insulation Assmebly Plate

3 Ply BUR Including Nailed Base Sheet Assembly Plate

4 Ply BUR Bonded to Insulation Assembly Plate

4 Ply BUR Including Nailed Base Sheet Assembly Plate

5 Ply BUR Bonded to Insulation Assembly Plate

5 Ply BUR Including Nailed Base Sheet Assembly Plate

Download the 3-Part BUR Master Spec

Installation Guides

JM BUR Installation Application Guide

JM Vapor Barrier Installation Guide

PermaFlash® Bituminous Flashing System Detail Instructions

PermaFlash® Bituminous Flashing System Penetration Flashing

Additional Resources

BUR Membrane Selector Guide

BUR Membrane Selector Guide - Español

Adhesives and Cements Selector Guide

Insulation and Cover Board Selector Guide

Insulation and Cover Board Selector Guide - Español

Coatings Selector Guide

Coatings Selector Guide - Español

Fasteners and Plates Selector Guide

Documents

Videos

BUR Behind the Scenes

JM BUR Outlasts

Johns Manville BUR Roofing Systems are made to last. These systems have years of experience and a redundant layer system providing additional protection for your roof.

Watch Here
The Chartwell Industrial Project - BUR

The Original Roofing Company Uses JM BUR System to Get Job the Done

The Original Roofing Company (TORC) won a new build project in southwest Las Vegas from general contractor Martin-Harris Construction for a 200,000 square foot mixed use office and warehouse structure in an area with industrial. buildings, car dealerships and residential housing.

Watch Here
Pikes Peak BUR Project

Johns Manville Products Perform at 14,000 Feet on "America's Mountain"

This job's unique location on top of Pikes Peak gives testament to JM BUR system's ability to weather the most intense of climates. Discover the products used and the excellent craftsmanship of Superior Roofing.

Watch Here
D&D Roofing

BUR Timelapse

D&D Roofing installs a new BUR system on Thomas Jefferson High School.

Watch Here

BUR Project Spotlight

The Chartwell Industrial Project - BUR

The Original Roofing Company Uses JM BUR System to Get Job the Done

The Original Roofing Company (TORC) won a new build project in southwest Las Vegas from general contractor Martin-Harris Construction for a 200,000 square foot mixed use office and warehouse structure in an area with industrial. buildings, car dealerships and residential housing.

Watch Here
Pikes Peak BUR Project

Johns Manville Products Perform at 14,000 Feet on "America's Mountain"

This job's unique location on top of Pikes Peak gives testament to JM BUR system's ability to weather the most intense of climates. Discover the products used and the excellent craftsmanship of Superior Roofing.

Watch Here
Saddleback Roofing

JM BUR System with GlasKap® CR G Effectively Meets Title 24 and Production Goals

Fitting of its “Inland Empire” location, Perris Logistics Center is a huge structure, with a roof of over 1.2 million square feet. This very warm and often windy Southern California area requires a building with high thermal efficiency, to protect the valuable products and high tech equipment inside as well as keep energy costs down. The center needed a “cool” roof that was reliable in the wind and elements.

Learn More
Berwald Roofing Company Inc.

Schmidt Brewery Renovation Offers New Life to Local Artists

Schmidt Brewery is the largest redevelopment project in St. Paul, MN history, coming in at a total cost of over $120 million. The result is Schmidt Artist Lofts, which brings 260 total units (247 apartments, 13 townhomes) within reach of St. Paul painters, writers, web designers and performers.

Learn More
RoofTech Consulting Group Inc.

Thomas Jefferson High School: JM BUR System Chosen For Superior Durability

After 25 years of enduring the hot sun, freezing snow storms, heavy wind and hail, the Thomas Jefferson High School (TJHS) roof was aging and at risk of leaking. Denver Public Schools (DPS) Project Manager Michael Butler sought a solution before the roof reached a critical stage.

Read More

Roofing Institute Contractor Training

Our JM approved contractors can take advantage of hands-on training and learn all the latest best practices for your profession through our learning program. As low-slope roof technology, materials and performance demands evolve, it is crucial to understand new materials and technologies. JM has built an education and development initiative that utilizes our over 160 years of experience in commercial roofing.

Training mechanically fastening TPO around a penetration.

BURSI for Design Professionals

Our BURSI® program, run by our Specifier Services Team offers customizable education programs that are certified by American Institute of Architects (AIA). We offer anything from one-hour “Lunch and Learns” to a 10-hour, multiple-day seminar. Our program is known as (BURSI) Better Understanding of Roofing Systems Institute. Please contact your local sales representative for more information on upcoming BURSI dates or visit our calendar to see the next educational seminar is in your area.

Roofing Systems Blog

Commercial Roofing

Get the Job Done Faster with JM’s New EPDM FIT SA (Even in the Cold)

At Johns Manville, we know time matters when it comes to a roofing job going right. So, too, do temperatures. Our new JM EPDM FIT SA allows contractors to make the most of bo...

Read this article
Commercial Roofing

Johns Manville Roofing Volunteer Day

A team of 21 Johns Manville Roofing Systems employees recently spent a morning pitching in at Food Bank of the Rockies as part of the company-wide Global Community Day. No...

Read this article
Commercial Roofing

Johns Manville Rocks the Trade Show Scene

There’s nothing like a crowded show floor to ramp up excitement about the roofing industry. At least that’s how we see it at Johns Manville. Attending educational events and ...

Read this article
Commercial Roofing

JM TPO Heat Weldable Cover Tape Joins JM Lineup

At Johns Manville, we know versatile products can be the key to a roofing project not only coming in on time and on budget, but also standing the test of time. That’s why we’...

Read this article
Commercial Roofing

Above It All Episode 45: Johns Manville Introduces EPDM FIT Self-Adhered

Podcast episode 45 features Johns Manville's new EPDM Product Manager, Kevin Roepe. Kevin discusses Johns Manville's new EPDM FIT Self-Adhered membrane, product highlights, a...

Read this article
Commercial Roofing

Above It All Episode 44: IIBEC Features JM's Technical Sales Experts

Podcast episode 44 features Johns Manville's Technical Sales duo, Rick Gustin and Rob Hughes. Rick and Rob discuss their wind convergence presentation at IIBEC's Internationa...

Read this article
Commercial Roofing

Bright Future Ahead: JM Joins SkillsUSA in Developing Next Generation of Workers

For more than 160 years, people have been at the core of everything Johns Manville does. Recently that commitment took center stage in Georgia, where JM joined forces with th...

Read this article
Commercial Roofing

ENRGY 3® HD Removes Limitations From Reroof of Nonprofit Serving Those with Limited Vision

Limited roof access didn’t stand in the way of finding an affordable reroof for The Lighthouse of Houston, a nonprofit that has serving those with limited vision for more tha...

Read this article
Commercial Roofing

Future of Trades Looks Bright at Let’s Build Camp

JM team members got hands-on last month to help girls build construction skills and help the industry build a pipeline of future professionals at Let’s Build Construction Cam...

Read this article

Explore More

Commercial Roofing News

Built-Up Roofing (BUR) Systems

BUR Roofing Systems

Products

BUR Membranes

GlasBase Plus

GlasKap

GlasKap CR G

GlasKap Plus

GlasPly IV

GlasPly Premier

GlasTite Flexible

PermaPly 28

Ventsulation

Vapor Barriers

JM Vapor Barrier SA

JM Vapor Barrier SAR

BUR Accessories

CR Roofing Granules

Roofing Granules

Adhesives, Cements, Sealants and More

Asphalt Primer

Bestile Utility Cement

JM One-Step Foamable Adhesive

JM Roofing System Urethane Adhesive - RSUA

JM Two-Part Urethane Insulation Adhesive

JM Two-Part Urethane Insulation Adhesive (UIA) Canister

MBR Flashing Cement Base and Activator

MBR Utility Cement

Insulation and Cover Boards

DEXcell Cement Roof Board

DEXcell FA Glass Mat Roof Board

DEXcell® FA VSH Glass Mat Roof Board

DensDeck Prime Roof Board

DensDeck StormX Prime Roof Board

DuraBoard

ENRGY 3 - Flat and Tapered

ENRGY 3 CGF - Flat and Tapered

FESCO Board

FESCO Board HD

FesCant Plus and Tapered FESCO Edge Strip

Half-Inch Retro-Fit Board

ProtectoR Foam

RetroPlus Roof Board

SECUROCK Cement Roof Board

SECUROCK Gypsum-Fiber Roof Board

Tapered FESCO Board

Fasteners and Plates

All Purpose Fasteners

JM ENRGY Anchor

JM Termination Systems

Lightweight Concrete (LWC) Fasteners

Lite-Deck Fasteners and Plates

Polymer Auger Fasteners

Structural Concrete Deck Fasteners and Plates

UltraFast AccuTrac Fastener and Plate System

UltraFast Fasteners and Plates

UltraLok Locking Impact Fastener and Plate

Liquid Applied

1-Part PermaFlash

JM PMMA All Purpose Primer

JM PMMA Catalyst

JM PMMA Cleaner

JM PMMA Detailer

JM PMMA Field Resin

JM PMMA Flashing Resin

JM PMMA Metal Primer Base and Activator

JM PMMA Repair Paste

JM PMMA Scrim

JM PMMA THIXO

JM PMMA Textured Top Coat

JM PMMA Top Coat

JM PMMA Top Coat Color Pack

PermaFlash System

Coatings

Asphalt Emulsion Roof Coating

Fibrated Aluminum Roof Coating

JM Coating Acrylic

JM Coating Acrylic CR

JM Coating Acrylic Flashing

JM Coating Field Polyester Reinforcing Fabric