Multi-Fit Aluminum Elbow Covers

Product Short Description: Made in two precision formed matching halves to cover and weatherproof insulated 90° pipe elbows

Product Details

Multi-Fit Aluminum Elbow Covers

Product Long Description: Each Multi-Fit Aluminum Elbow Cover is designed to fit over 90° insulation elbows with a specific outer diameter, regardless of the pipe size, use of long or short radius pipe elbows, or insulation thickness. The thirteen sizes of JM Multi-Fit Aluminum Elbow Covers will fit 111 combinations of NPS and insulation thickness up to a nominal outer insulation diameter of 12.75 inches. Like our Aluminum Jacketing, Multi-Fit Aluminum Elbow Covers are a premier protective jacketing for insulation pipe systems and are a crucial accessory to complement the aluminum jacketing. They help protect the insulation and underlying pipe from physical damage, UV exposure, corrosive environments, and water. They can also reduce the time and labor needed to install a metal jacketing system.

Features

Multi-Fit Aluminum Elbow Covers

Features

Recommended Uses JM Multi -Fit Aluminum Elbow Covers are recommended for use when a reduced number of possible elbow sizes are desired and aluminum jacketing is used on the associated straight sections of pipe.

Gauge, Composition, Finish, Moisture Barrier, Exterior Paint, Emittance, Flammability, & Packing JM Multi -Fit Aluminum Elbow Covers are made from0.024 inch thick 1100 aluminum alloy with a smooth (mill) surface finish, have a polyfilm moisture barrier, come standard with a clear painted exterior surface with an emittance of 0.5, have a very low flammability, and are packed with 15 elbow sets (30 elbow halves) per carton. For details on these features, please consult the JM data sheet on standard Aluminum Elbow Covers.

Fit, Size Selection, & Installation For detailed information on selecting JM Multi-Fit Aluminum Elbow Covers for various combinations of NPS and insulation thickness, consult the JM Fitting Selection Guide. JM Multi -Fit Aluminum Elbow Covers are designed to yield a 5/8” overlap at the heel and throat joints when used over insulation that complies with the target diameters in ASTM C585 and C450. If the insulation outer diameter deviates significantly from that specified in these standards, the overlap size may change and the fit may be compromised.

Documents

Sign up for Industrial Insulation news & events

Join Our Newsletter

Resources

Explore our Industrial insulation tools, education and training programs built specifically to aid you in your professional development

Tools
Education

Request a Technical Presentation
Johns Manville offers customized presentations to help you stay up to date on the latest market trends and enhance your knowledge of JM products.

The Source: Industrial Insulation Resource Library
The Source is where we house the latest Insulation Intel® on industry trends, insights, and continuing education opportunities. This is a resource built specifically to aid you in your professional development. Explore our webinars, compare specs, and follow our blog all right here at The Source.

SmartBinder Resource Library
Your resource for all JM documents in one place.

Where to Buy
Use our insulation locator tool to find JM products near you.

Resource Pages

Calcium Silicate Pipe and Board Insulation Resource Library
Johns Manville's Thermo-1200® calcium silicate has added corrosion inhibitors, become water-resistant, and is now offered in a curved segment configuration for large diameter (30” – 126”) equipment

Cross-Flo Jacketing Resource Library
Water isn’t welcome inside an insulation system, so get it out – and fast – with the help of Johns Manville’s Cross-Flo Jacketing. This new product is perfect for industrial and mechanical insulation systems, helping to expel unwanted water.

Corrosion Under Insulation (CUI) Resource Library
Thermal insulation is an integral part of the industrial complex. However, even the best designed and installed systems sometimes become compromised, resulting in the presence of water at the pipe surface and the potential for Corrosion under Insulation (CUI). Learn more about CUI and how JM provides the solution.

Insulation Solutions for Cryogenic and LNG Systems
Cryogenic and below-ambient pipe and tank temperatures can drop to -297°F, making a well-designed insulation system critical to ensure safe and efficient operations in an Liquefied Natural Gas (LNG) facility. At Johns Manville, we’re here to assist you with all the details you need to properly design, specify and install your cryogenic and LNG application.

Case Studies

Berne Processing Complex
The first of three plants for the new $150 million BlueRacer Midstream LLC gas processing facility in Lewisville, Ohio called for high-temperature insulation solutions that would meet the project specifications and aggressive timeframe for delivery.

Newark Energy Center
The construction of the Newark Energy Center gas-fired power plant in Newark, New Jersey called for the latest GE gas turbine technology to supply electricity to more than 700,000 homes.

CUI Protection at a Refinery
The service crew at a Washington state location put Cross-Flo®jacketing to use on a maintenance project, after first testing theproduct themselves. They’re now hopeful it can be used regularly

Explore More

Industrial Insulation Intel

Multi-Fit Aluminum Elbow Covers

Multi-Fit Aluminum Elbow Covers

Featured Documents

Product Details

Multi-Fit Aluminum Elbow Covers

Features

Multi-Fit Aluminum Elbow Covers

Documents

Sign up for Industrial Insulation news & events

Resources

Resource Pages

Case Studies

Explore More

Blog

Webinars

Insulation Minute