Ceramic-Coated Roofing Granules: Specifically engineered for optimal embedment in the APP-blended sheet. The ceramic coating promotes excellent long-term adhesion.
APP (Atactic Polypropylene) Polymer and Asphalt Blend: Provides an extremely durable sheet with excellent weathering characteristics, flexibility and dimensional stability for ease of handling and quick installations.
Polyester Reinforcement Mat: Offers good tensile strength, toughness and puncture resistance and can accommodate stresses created by typical rooftop expansion and contraction forces.
Surfacing: Fine mineral parting agent on the bottom side. This enables the product to be applied with cold adhesive.
When it comes to design, we've got the tools to get you from the desk to the roof. Here you will find all of the APP specifications, 3-part specs, details and installation guides. If you have any questions when it comes to installation, please contact our Specifier Services Group for design and your local technical representative for the field.
| PENETRATION, EQUIPMENT SUPPORT AND PROTECTION | CAD | |
| BIT-16 Roof Penetration Pan | DWG | |
| BIT-17 Lighting Rod on Roof Surface | DWG | |
| BIT-PT-01 Bituminous Light Support | DWG | |
| BIT-PT-02 Bituminous Medium Support | DWG | |
| BIT-PT-03 Bituminous Heavy Support | DWG | |
| BIT-PT-04 DynaTred Traffic Pads with Pavers | DWG | |
| BIT-PT-05 DynaTred Traffic Pads | DWG |
| WALL FLASHING | CAD | |
| BIT- 1 (LB) Base Flashing for Load Brng Wall with Counterflashing | DWG | |
| BIT-2 (WL) Base Flashing for Wall less than 24 inches | DWG | |
| BIT-3 (WH) Base Flashing for Wall more than 24 inched with Coping | DWG | |
| BIT-3 (WL) Base Flashing for Wall less than 24 inches with Coping | DWG | |
| BIT-6 (TH) Base Flashing for Wall more than 24 inches with Coping | DWG | |
| BIT-6 (TL) Base Flashing for Wall less than 24 inches with Coping | DWG | |
| BIT-15 (E) EPDM Wall Covering with BUR Base Flashing | DWG | |
| BIT-15 (E) Alt-EPDM Wall Covering with BUR Base Flashing | DWG | |
| BIT-15 (P) PVC Wall Covering with BUR Base Flashing | DWG | |
| BIT-15 (T) TPO Wall Covering with BUR Base Flashing | DWG |
| DRAIN, PIPE AND VENT DETAILS | CAD | |
| PMF-5 PermaFlash®-To-Drain | DWG | |
| PMF-5 (ALT) PermaFlash®-To-Drain | DWG | |
| PMF-5S PermaFlash® Drain Scrim | DWG | |
| PMF-7 PermaFlash® Through-Wall Scupper | DWG | |
| PMF-7S PermaFlash® Through-Wall Scupper Scrim | DWG | |
| PMF-8 PermaFlash® Overflow Scupper Detail | DWG | |
| PMF-8S PermaFlash® Overflow Scupper Scrim Detail | DWG |
| EDGE | CAD | |
| HW-4 (GS) Gravel Stop | DWG | |
| HW-4 (GS-ALT) Gravel Stop Alternate | DWG | |
| HW-4 (GTR) Gutter | DWG | |
| HW-4 (PRESTO LOCK) Presto Lock Fascia System | DWG | |
| HW-4 (PRESTO-TITE) Presto-Tite Edge Metal System | DWG | |
| HW-4 (RMCF) Raised Metal Cant Fascia | DWG | |
| HW-4 (GTR-ALT) Roof Edge Gutter ALT | DWG | |
| HW-4 (RFS) Rail Fascia System Roof Edge | DWG |
| WALL FLASHING | CAD | |
| HW-1 (LB) Masonry Wall w/ Counterflashing | DWG | |
| HW- 2 (PT) Perma Tite Coping | DWG | |
| HW-3 (WH) Wood Wall >24” with Coping | DWG | |
| HW-3 (WL) Wood Wall <24” with Coping | DWG | |
| HW-6 (TH) Masonry Wall >24” with Coping | DWG | |
| HW-6 (TL) Masonry Wall <24” with Coping | DWG | |
| HW- 6 (TL) ALT - Base Flashing For Masonry Wall | DWG | |
| HW-15 (E) EPDM Wall Covering with Bituminous Base Flashing | DWG | |
| HW-15 (P) PVC Wall Covering With Bit Base Flashing | DWG | |
| HW-15 (T) TPO Wall Covering with Bituminous Base Flashing | DWG | |
| HW-15 (T-ALT) TPO Wall Covering with Bituminous Base Flashing | DWG | |
| HW-20 (WH) Gypsum Wall on Metal Studs >24” w/ Coping | DWG | |
| HW-20 (WL) Gypsum Wall on Metal Studs <24” w/ Coping | DWG | |
| HW-24 Venting Lightweight Concrete | DWG | |
| HW-25 (LB) Optional Two-Ply Base Flashing for Load-Bearing Masonry Wall w/ Counterflashing | DWG |
2x4 Ft. Roof Insulation Fastener Placement
4x4 Ft. Roof Insulation Fastener Placement
4x8 Ft. Roof Insulation Fastener Placement
BM-12,12,12 Mechanically Fastened Base Sheet (12", 12", 12" O.C.)
BM-7,7,7 Mechanically Fastened Base Sheet (7", 7", 7" O.C.)
BM-7,9,9 Mechanically Fastened Base Sheet (7", 9", 9" O.C.)
BM-75,75,75 Mechanically Fastened Base Sheet (7.5", 7.5", 7.5" O.C.)
BM-9,12,12 Mechanically Fastened Base Sheet (9", 12", 12" O.C.)
BM-9,18,18 Mechanically Fastened Base Sheet (9", 18", 18" O.C.)
BM-9,9,9 Mechanically Fastened Base Sheet (9", 9", 9" O.C.)
FA-16 Fully Adhered Cover (16-24-32)
FA-8 Fully Adhered Cover (8-16-32)
CBUA-12-6-4 Cover Board Urethane Adhesive Fastening
ICBUA-8-4-4 Insulation and Cover Board Urethane Adhesive Fastening
ICBUA-12-6-4 Insulation and Cover Board Urethane Adhesive Fastening
INUA-12-6-4 Insulation Urethane Adhesive Fastening
*Please be sure to download the file before selecting your assembly*
2 Ply APP Bonded to Insulation Assembly Plate
JM APP Installation Application Guide
JM Vapor Barrier SA Installation Guide
PermaFlash® Bituminous Flashing System Detail Instructions
PermaFlash® Bituminous Flashing System Penetration Flashing
APP Membrane Selector Guide - Español
Adhesives and Cements Selector Guide
Insulation and Cover Board Selector Guide
Insulation and Cover Board Selector Guide - Español
Coatings Selector Guide - Español
Fasteners and Plates Selector Guide
Johns Manville offers one of the most comprehensive portfolios of commercial low-slope roofing solutions. We have a long standing dedication to providing solution-based systems for building owners.
Here you will find quick links and cheat sheets to Johns Manville roofing systems code approvals and ratings.
Guarantees and Roof Maintenance
Support services can include: conceptual product information, building science, wind uplift data, national and local code understanding, FM Global® and UL® regulations, fastening patterns and sheet layouts, installation guidelines and standard details.
Re-roofing mechanically attached or ballasted insulated single-ply systems now have the potential for recycling versus contributing to a landfill.
Your resource for all JM documents in one place.
The Submittal Wizard is a tool to help you pull together the necessary documents for your submittal package.
