Commercial Building Insulation

Johns Manville CladStone™ Water & Fire Block insulation is manufactured from inorganic fibers derived from volcanic rock. Advanced manufacturing technology ensures consistent product quality, with high-fiber density and low shot content for excellent performance. Noncombustible, with water-repellent properties, it is ideal for exterior cavity wall and rainscreen applications. Available in 4 densities, CladStone 45 (4.5pcf), CladStone 60 (6.0 pcf), CladStone 80 (8.0 pcf) and CladStone 110 (11.0 pcf).

Johns Manville MinWool^® Curtainwall insulation is available in a wide range of thicknesses and is available plain or with a foil facing vapor retarder. Providing superior fire resistance and acoustical properties, MinWool Curtainwall is designed for use in glass, metal and masonry curtainwall spandrel systems and can be placed between or over framing members.

Available in 2 densities, Curtainwall 40 (4.0 pcf) and Curtainwall 80 (8.0 pcf). 

Johns Manville MinWool^® Safing is available plain or with a foil facing vapor retarder on one face. Nonorganic and moisture-resistant, MinWool Safing prevents smoke and flames from passing through openings in fire-rated assemblies. It is designed to provide a fire-rated seal when installed between the spandrel panel and floor slab in commercial curtainwall systems.

Johns Manville MinWool^® Sound Attenuation Fire Batt (SAFB) insulation is manufactured from inorganic fibers derived from volcanic rock. Noncombustible and moisture-resistant, the lightweight and flexible batts are designed to deliver excellent noise control in metal-stud wall cavities of interior partitions, exterior walls or above suspended ceiling systems.  As excellent sound absorbers, these batts improve the wall assembly Sound Transmission Class (STC) ratings by up to 10dB.

Johns Manville MinWool^® Window Wall Insulation is designed to be used primarily in glass and metal window wall systems. It offers superior fire resistance, and excellent thermal and acoustical insulating properties. MinWool Window Wall is made from mineral wool and bound with a thermosetting resin. Advanced manufacturing technology ensures consistent product quality, with high-fiber density and low shot content for excellent performance. 

JM Corbond® 2.8 closed-cell spray polyurethane foam (SPF) is a premium, two component, 2.8 pcf insulation system designed for applications such as storage tanks, agricultural and other Class U buildings, underground, and geological operations. Its high compressive strength and outstanding dimensional stability, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for situations where a high-performance foam is paramount.

ADVANTAGES:

Complete Coverage: Expands and adheres without shrinking or settling.
Energy-Efficient: Reduces air and moisture infiltration.
High-performance Foam: High compressive strength and outstanding dimensional stability.
Moisture Performance: Resists mold growth; meets current vapor retarder codes.
Premium two component, 2.8 pcf insulation system.

JM Corbond® 2.8 HFO closed-cell spray polyurethane foam (SPF) is a premium, two component, 2.8 pcf insulation system designed for applications such as storage tanks, agricultural and other Class U buildings, underground, and geological operations. The fourth-generation technology allows JM Corbond 2.8 HFO to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high compressive strength and outstanding dimensional stability, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for situations where a high-performance foam is paramount.

JM Corbond® High Yield Open-cell (HY OC) Spray Polyurethane Foam insulation is a two-component, low-density, E84 Class A rated, nonstructural insulation system designed for interior commercial, residential and industrial applications. JM Corbond HY OC is 100% water blown. JM Corbond HY OC offers the highest yield of any JM Corbond open-cell product. Its superior performance and exceptional sprayability make it an ideal choice for high-performing energy efficient buildings.

JM Corbond® IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two-component, Class 1 rated, medium-density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential, and industrial buildings. The HFO technology allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.

Johns Manville Corbond^® open-cell spray foam is a lower density, nonstructural insulation that offers an R-Value of R-3.8 per inch. It delivers high yield, minimizes sound transmission and virtually eliminates any air leakage. It's designed to improve energy efficiency for a wide variety of residential, commercial and industrial applications and can act as an effective air barrier.

Johns Manville Corbond^® Open-cell Appendix X spray foam provides an R-Value of R-3.7 per inch, and meets AC 377 NFPA 286 Appendix X requirements for application without an ignition barrier in attics and crawl spaces. This low-density, nonstructural insulation allows for high yield while prodiving excellent heat, air and sound control. Recommended for use in residential, commercial and industrial applications.

Johns Manville has partnered with No-Burn, Inc. to offer No-Burn Plus ThB. This tintable white, thin film intumescent coating can be applied over JM open- and closed-cell polyurethane foams. When exposed to high temperatures and flame it intumesces, which creates a char-barrier to reduce heat transfer and surface burning in the event of a fire. This nontoxic, water-based coating complies with IRC and IBC and can serve in lieu of otherwise code-prescribed thermal barriers. 

We have on-staff experts designated to helping you select the right parts and equipment for your spray foam rig. Our spray foam team has access to an extensive catalog of spray foam parts and equipment with overnight shipping capabilities for emergencies.  You can connect with our technical service representative via phone, email, video calls or even text message to ensure you are ordering the correct part.  Click here for more details.

Johns Manville AP™ Foil-Faced Polyiso Foam Sheathing boards are available in R-Values up to R-28 and offer a reflective foil facer on one side and a non-reflective facer on the other. AP Foil provides exceptional heat, moisture and air control and, when installed correctly, eliminates all major thermal bridges that cause heat loss. The rigid continuous insulation board allows for maximum wall and worksite efficiency.

Johns Manville AP^™ Foil25 Polyiso Continuous Insulation is a 25-psi compressive strength board that consists of a closed-cell polyisocyanurate foam core bonded on each side to a foil facer. AP Foil25 is well suited for below-grade residential applications, as well as commercial applications where higher compressive strength boards are preferred for certain exterior cladding systems. AP Foil25 is a water-resistive barrier, vapor barrier and air barrier all in one.

Johns Manville CI Max^® Polyiso Foam Continuous Insulation is available in R-Values up to R-26 and provides a layer of insulation to reduce thermal bridging and improve energy efficiency. CI Max Continuous Insulation is designed for exposed interior applications and is approved for use without a thermal barrier. It is suitable for wall or ceiling applications in residential, commercial, agricultural and industrial buildings.