Spray Foam Insulation

John Manville's complete line of spray polyurethane foam (SPF) insulation solutions provides superior thermal energy efficiency, as well as advanced air and sound control. SPF insulation completely covers gaps and voids, works in hard-to-insulate areas and can exceed the performance of traditional fiberglass insulation. Both Johns Manville SPF product categories, open-cell and closed cell, deliver high yield, superior performance and exceptional sprayability.

Filter Products By
  • Properties
  • Construction
  • Application Areas
Jump To
Offering the highest yield of all JM Corbond® open-cell spray foam products, JM Corbond HY OC offers superior sprayability, improves energy efficiency, and minimizes sound transmission.

JM Corbond® High Yield Open-cell (HY OC) Spray Polyurethane Foam insulation is a two-component, low-density, E84 Class A rated, nonstructural insulation system designed for interior commercial, residential and industrial applications. JM Corbond HY OC is 100% water blown. JM Corbond HY OC offers the highest yield of any JM Corbond open-cell product. Its superior performance and exceptional sprayability make it an ideal choice for high-performing energy efficient buildings.

 

JM - BI - SprayFoam - OC - 0921 - 720x480
 SPF Acceptance Criteria  ASTM AC377  Pass
 Flame Spread  ASTM E84  ≤ 25
 Smoke Development  ASTM E84  ≤ 450
 Fungi Resistance  ASTM E283  Pass
 Dimensional Stability  ASTM D2126 -8.8% Change in Volume
 Core Density  ASTM D1622  0.4 pcf (normal)
 Air Permeance  ASTM E2178-03  < 0.02 (L/s)/m

DATA SHEET

JM Corbond HY OC Data Sheet
JM Corbond HY OC Data Sheet (ES)

SDS

JM Corbond SDS - A
JM Corbond SDS - A (ES)
JM Corbond HY OC SDS - B
JM Corbond HY OC SDS - B (ES)

LITERATURE

Product Selector Guide
TechConnect Sell Sheet
JM Corbond High Yield Open-Cell FAQ

INSTALLATION INSTRUCTIONS

JM Corbond High Yield Open-Cell Installation Guide
JM Corbond High Yield Open-Cell Installation Guide (ES)
SPF Processing Parameters
SPF Change-over Procedure
SPF Change-over Procedure (ES)
SPF Safety Warning Sign
SPF Health and Safety Sheet
Corbond Daily Work Log

EVALUATION REPORTS

JM Corbond OC Code Compliance Research Report (CCRR-1079)

 

Available Documents

Offering a high R-Value per inch, Johns Manville Corbond® III closed-cell spray polyurethane foam provides air sealing and moisture control in a single install step.

Johns Manville Corbond® III closed-cell spray polyurethane foam insulation offers and R-Value of R-7 per inch and can be applied in a single pass to a maximum of 3.5 inches, providing superior thermal performance with seamless air sealing and moisture control in a single step. Multiple immediate passes, with no wait time, may also be applied. With high yield and excellent adhesion, it's an ideal choice for high-performing energy efficient commercial, residential and industrial applications.

Resi CC SPF 223 190x122

Advantages

Complete Coverage: Expands and adheres without shrinking or settling.
Energy-Efficient: Reduces air and moisture infiltration to the building envelope and provides continuous coverage for high thermal performance.
Air Barrier: Prevents leaks when installed at 1” thickness or more. 
Moisture Performance: Resists mold growth; meets current vapor retarder codes.
Wide Application Temperature Range: Can be applied between 20°F and 120°F , delivering consistent performance with seasonal versatility.
Faster Installation: Spray easily in a single pass from a minimum of .5" to a maximum of 3.5”.  Multiple immediate passes, with no wait time, may also be applied. See Data Sheet for complete information.
Commercial Approvals: NFPA 285 assembly approvals. Appendix X approval for application in unoccupied attics and crawl spaces without a prescriptive ignition barrier or coating.

  SPF Acceptance Criteria   ASTM AC377   Pass
  Flame Spread    ASTM E84   ≤ 25
  Smoke Development   ASTM E84   ≤ 450
  Fungi Resistance    ASTM C1388   Pass
  Dimensional Stability    ASTM D2126   < 15% change in volume
  Nominal Density    ASTM D1622   2 pcf
  Closed-Cell Content   ASTM D6226   > 90%
  Compressive Strength (1”)    ASTM D1621   36 psi
  Water Absorption    ASTM D2842   0.9%
  Water Vapor Transmission    ASTM E96   0.61 perms @ 1.5"
  Air Permeance    ASTM E2178-03   0.00055 (L/s)/m at 75 Pa
  Sound Transmission    ASTM E90-90, ASTM E413-87   36 (STC)

Data Sheet

JM Corbond III Data Sheet

SDS

JM Corbond SDS - A
JM Corbond SDS - A (ES)
JM Corbond Closed-cell SDS - B
JM Corbond Closed-cell SDS - B (ES)

Literature

Product Selector Guide
Exploring the Efficacy of High Lift Spray Foam Insulation White Paper
JM Spray Foam Overview Brochure
TechConnect Sell Sheet
JM Spray Foam Trial and Technical Support Brochure
JM Corbond III Seasonal FAQ
JM Spray Foam Parts and Equipment (Fusion AP)

STC Rating Documents

Acoustical Assemblies STC Rating Reference Guide

Installation Instructions

JM Corbond III SPF Installation Guide
SPF Processing Parameters
SPF Change-over Procedure
SPF Change-over Procedure (ES)
SPF Safety Warning Sign
SPF Health and Safety Sheet
Corbond Daily Work Log

Certificates

JM Corbond Re-Occupancy Certificate
JM Corbond Insulation Certificate

Spray Foam Certification

SPF Certification Overview
 

 

Technical Bulletins

JM Corbond III Air Barrier Advantage
Hybrid ccSPF + Fiberglass Wall Recommendations

Application Guides

Penetrations - Ambient Temperature
Below Grade Wall
Change in Substrate
Crawl Space
Expansion Joint
Floor Slab to Foundation Wall
Framed Floor to Foundation Wall
High Temperature Penetrations
Interstory Connections
Parapet
Substrate Joints and Defects
Unvented Attic Insulated Roof Deck
Unvented Attic Insulated Roof Deck V2
Vaulted Ceiling
Vented Attic
Wall Corner
Window Head

Evaluation Reports

Corbond III IAPMO Evaluation Report
Environmental Product Declaration Spray Polyurethane Foam Insulation (HFC) Report
Life Cycle Assessment of Spray Polyurethane Foam Insulation Report

Specifications

JM Corbond III Greenguard
JM Corbond III Greenguard Gold
JM Corbond III

Case Studies

All-American House Case Study
Jay Peak Resort Case Study
Vision House Case Study

Project Profile

Denny Way Project Profile

 

Spray Foam Overview

 

SPF Changeover Procedure

 

AP Fusion SPF Gun Cleaning and Assembly

 

SPF E03 Hose Break Diagnosis

 

SPF E04 FTS or Thermocouple Diagnosis


JM Overview Video

 

What is Spray Foam? (ACC)

Available Documents

High-yield, closed-cell spray foam with HFO technology. This allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and an Ozone Depletion Potential (ODP) of zero.

JM Corbond® IV closed-cell spray polyurethane foam (SPF) is a next generation HFO blown, two-component, Class 1 rated, medium-density, SPF insulation system. JM Corbond IV is designed to insulate commercial, residential, and industrial buildings. The HFO technology allows JM Corbond IV to be produced with a low Global Warming Potential (GWP) and with an Ozone Depletion Potential (ODP) of zero. Its high yield, superior thermal and moisture performance, and exceptional sprayability and adhesion make it an ideal choice for high-performing energy efficient buildings.

JM - BI - SPF - Corbond IV - 720x480
 Flame Spread  ASTM E84  ≤ 25
 Smoke Development  ASTM E84  ≤ 450
 Fungi Resistance  ASTM C1388  Pass
 Dimensional Stability  ASTM D2126  12% change in volume
 Core Density  ASTM D1622 2.0 lb/ft3
 Closed-Cell Content  ASTM D6226  > 90%
 Compressive Strength (1")  ASTM D1621  36 psi
 Water Absorption  ASTM D2842  0.88%
 Water Vapor Transmission  ASTM E96  0.61 perm at 1.5", 1.1 perm at 1"
 Air Permeance   ASTM E2178-03  0.00055 (L/s)/m at 75 Pa
 Sound Transmission  ASTM E90-90, ASTM E413-87  36 (STC)

DATA SHEET

JM Corbond IV Data Sheet

SDS

JM Corbond SDS - A
JM Corbond SDS - A (ES)
JM Corbond IV Closed-cell SDS - B
JM Corbond IV Closed-cell SDS - B (ES)

LITERATURE

Product Selector Guide
JM Corbond IV Guide
TechConnect Sell Sheet
Building Envelope Solutions

INSTALLATION INSTRUCTIONS

JM Corbond IV Installation Guide
SPF Processing Parameters
SPF Change-over Procedure
SPF Change-over Procedure (ES)
SPF Safety Warning Sign
SPF Health and Safety Sheet
Corbond Daily Work Log

EVALUATION REPORTS

Environmental Product Declaration Spray Polyurethane Foam Insulation (HFO) Report
JM Corbond IV IAPMO Report (ER 0146)

CERTIFICATES

JM Corbond IV Greenguard
JM Corbond IV Greenguard Gold

Project Profile

Denny Way Project Profile

Available Documents

Offering incredible yield, air isolation, R-value and acoustical performance, Johns Manville Corbond® Open-cell Spray Foam seals all voids and gaps to virtually eliminate air leakage.

Johns Manville Corbond® Open-cell Spray Foam is a lower density, nonstructural insulation that offers an R-Value of R-3.8 per inch. It delivers high yield, minimizes sound transmission and virtually eliminates any air leakage. It's designed to improve energy efficiency for a wide variety of residential, commercial and industrial applications and can act as an effective air barrier.

SF4

Advantages:

Energy-Efficient: Helps to improve energy efficiency by filling in gaps and cracks while creating an air seal.
Air Barrier: Air-impermeable at 3.75”.
Sound Transmission: Performs well acoustically when used in an assembly.
Installation: Provides high yield with superior sprayability at an exceptional value and low odor. Meets requirements for application without an ignition barrier attics and crawl spaces. 

  SPF Acceptance Criteria   ASTM AC377   Pass
  Flame Spread   ASTM E84   ≤ 25
  Smoke Development   ASTM E84   ≤ 450
  Fungi Resistance   ASTM E283   Pass
  Dimensional Stability   ASTM D2126   < 15% change in volume
  Nominal Density   ASTM D1622   0.5 pcf (normal)
  Open-Cell Content    ASTM D6226   > 92%
  Water Vapor Transmission   ASTM E96   26.5 perms @ 2"
  Air Permeance   ASTM E2178-03   < 0.02 (L/s)/m
  Sound Transmission   ASTM E90-90, ASTM E413-87   38 (STC)

Data Sheet

JM Corbond oc SPF Data Sheet (US)

SDS

JM Corbond SDS - A
JM Corbond SDS - A (ES)
JM Corbond ocSPF SDS - B
JM Corbond ocSPF SDS - B (ES)

Literature

Product Selector Guide
JM Spray Foam Overview Brochure
JM Spray Foam Trial and Technical Support Brochure
TechConnect Sell Sheet
JM Corbond oc ocx Sell Sheet
JM Spray Foam Parts and Equipment (Fusion AP)

Spray Foam Certification

SPF Certification Overview

Specifications

Corbond Open-Cell

Installation Instructions

JM Corbond oc SPF Processing Parameters
JM Corbond oc SPF Processing Parameters (ES)
JM Corbond® SPF Change Over Procedure
JM Corbond SPF Change-over Procedure (ES)
JM Corbond oc SPF Installation Guide
SPF Safety Warning Sign
SPF Health and Safety Sheet
JM Corbond Re-Occupancy Certificate
JM oc SPF for Unvented Attics Insulation Certificate
Unvented Attic Hatch Guide
Corbond Daily Work Log

Evaluation Reports

Code Compliance Research Report CCRR-1079
Environmental Product Declaration Spray Polyurethane Foam Insulation (HFC) Report
Life Cycle Assessment of Spray Polyurethane Foam Insulation Report

Certificates

JM Corbond OC SPF VOC Emission Test Certificate
JM Corbond Insulation Certificate

Case Study

inSPIRE Rock Climbing Center Case Study

Project Profile

Denny Way Project Profile

 

Spray Foam Overview

 

SPF Changeover Procedure

 

AP Fusion SPF Gun Cleaning and Assembly

 

SPF E03 Hose Break Diagnosis

 

SPF E04 FTS or Thermocouple Diagnosis


JM Overview Video

 

What is Spray Foam? (ACC)

Available Documents

Johns Manville has partnered with No-Burn, Inc. to offer No-Burn® Plus ThB. This tintable white, thin film intumescent coating can be applied over JM open- and closed-cell spray polyurethane foams.

Johns Manville has partnered with No-Burn, Inc. to offer No-Burn Plus ThB. This tintable white, thin film intumescent coating can be applied over JM open- and closed-cell polyurethane foams. When exposed to high temperatures and flame it intumesces, which creates a char-barrier to reduce heat transfer and surface burning in the event of a fire. This nontoxic, water-based coating complies with IRC and IBC and can serve in lieu of otherwise code-prescribed thermal barriers. 

No-Burn Plus ThB 6_88
Color Opaque/White/Tinted
Finish Flat
VOC Content 18 g/L EPA Method 24
Dry Time 60-90 minutes
Pails 5 gallons (19 L), 57.5 lbs.
Drums 55 gallons (208 L), 632.5 lbs.
Shelf Life 18 months
Cure Time 24 hours
Boiling Point 212°F 
Freezing Point 32°F 
% Volatile by Volume 33%
Specific Gravity 1.25 

Data Sheet

JM No-Burn Plus ThB Data Sheet

SDS

JM No-Burn Plus ThB White SDS
JM No-Burn Plus ThB SDS (ES)
JM No-Burn Black Tint SDS
JM No-Burn Black Tint SDS (ES)
No-Burn Plus ThB Custom Color Tint
No-Burn Plus ThB Custom Color Tint (ES)
No-Burn Plus ThB Gray
No-Burn Plus ThB Gray (ES)
No-Burn Plus ThB Dark Charcoal
No-Burn Plus ThB Dark Charcoal (ES)

Literature

TechConnect Sell Sheet

Evaluation Report

ER-305
TER 1905-03
JM Corbond III and Corbond IV IAPMO Report (ER 0146)

Certificates

Emission Test Certificate

Bulletins

Product Announcement

Available Documents

We have on-staff experts dedicated to helping you select the right parts and equipment for your spray foam rig. Our spray foam team has access to an extensive catalog of spray foam parts and equipment with overnight shipping capabilities for emergencies. You can connect with our technical service ...

We have on-staff experts designated to helping you select the right parts and equipment for your spray foam rig. Our spray foam team has access to an extensive catalog of spray foam parts and equipment with overnight shipping capabilities for emergencies.  You can connect with our technical service representative via phone, email, video calls or even text message to ensure you are ordering the correct part.  Click here for more details.

Parts_Equip_700x467